Yanmar 66 HP TIER 4 engine, 4WD, 540 PTO, (8.25-16 Front Tires, 280/85 R20 Rear Tires)
General Information

TC 6800 F TORA

Tractors with front steering
Four WD –
Front & rear final drive

Technical Data of the Standard configuration

ENGINE PANELS -- INDUCTION -- EXHAUST
Air cleaner with internal intake dry filter;
Diesel Particulate Filter (DPF) inside the hood.
TRANSMISSION
Synchronized Transmission gearbox with 16 fwd + 16 rev, and synchronized shuttle reverser; 540/540e Independent PTO with progressive hydraulic engagement standard; Electrohydraulic Front and rear differential locks; Start inhibit switch on shuttle reverser, PTO selector, seat, clutch and parking brake; Hydraulic clutch; Permanent four-wheel drive.
HYDRAULIC SYSTEM - 3-POINT LINKAGE - POWER LIFT - TOWING DEVICE
Hydraulic power-steering with "Load Sensing" system - 2 DA cylinders; Rear hydraulic remotes w/1 DA valve w/float & 1 oil reflow (total 3 quick couplings); Rear power lift with 3-point linkage cat.1-2; Lifting capacity 4180 lb; Front towing device; Rear swinging adjustable drawbar.
BRAKES
Hydraulic rear oil bath double-disc brakes; Emergency and parking brake band type on transmission with integrated mechanical SUPERBRAKE; Steering brakes.
FRAME - DRIVING COMFORT
Full chassis with oscillation system - Actio ®; Digital multifunctional dashboard with color display; Forward foldable safety roll bar suitable for beacon light attachment; Platform chassis on Silent-block; Horn, lighting equipment, electric power socket and plug; 3-way socket in the dashboard and seven way trailer socket; Adjustable padded seat; Safety belts; Battery isolation switch; 2 rear-view mirrors; Adjustable Steering Column.
WARRANTY
2 years warranty; with the opportunity to extend the guarantee up to 4 years.
TC TC 6800 F TORA
053A762001
ENGINE Yanmar - Tier 4
Cylinders 4
Power 48.5 kW / 66 hp
Injection direct, common rail
Cooling water
Induction turbo, intercooler
TRANSMISSION
Gearbox 16 fwd + 16 rev
PTO 540/540e/sync
HYDRAULIC SYSTEM
Circuit Load Sensing
Max flow rate 9 g/min
# Double Acting Distributors (N06011) 1 Floating
Oil reflow (N06011) 1
DIMENSIONS AND WEIGHTS
Minimum external width (standard tires) 50.6 in
TIRES
Front (Adjustable rims) 8.25-16
Rear (Adjustable rims) 280/85 R20
Model / Options Description Price Total
TC 6800 F TORA Yanmar 66 HP TIER 4 engine, 4WD, 540 PTO, (8.25-16 Front Tires, 280/85 R20 Rear Tires) $49,556 $49,556
US Pricing Additive from Italy Must be included in all configurations $0 $0
8.25-16 front 280/85 R20 rear (adjustable rims)  ** standard factory configuration, must check to order ** $0 $0
Without wheels $-402 $0
250/80-16 front 320/70 R20 rear (adjustable rims) $150 $0
280/70-18 front 360/70 R20 rear (adjustable rims) $207 $0
Front/rear steel flanges -- ** standard factory configuration, must check to order ** $0 $0
1 pair of front wheel weights 77 lb each ** not available on 15" wheels** $529 $0
1 pair of rear wheel weights 77 lb each ** not available on 15" wheels** MGH standard configuration $529 $0
1 pair of front wheel weights 77 lb each + 1 pair of rear wheel weights 77 lb each ** not available on 15" wheels** $1,058 $0
2 pairs of front wheel weights 77 lb each ** not available on 15" wheels** $1,058 $0
2 pairs of rear wheel weights 77 lb each ** not available on 15" wheels** $1,058 $0
2 pairs of front wheel weights 77 lb each + 2 pairs of rear wheel weights 77 lb each ** not available on 15" wheels** $2,128 $0
No wheel weights -- ** standard factory configuration, must check to order ** $0 $0
Mounting plate for front attachments (included when ordering Code N18002 -- Front bull-bar) $494 $0
Front weights mounted on side of hood (2+2 total 195 lbs) ** not available with front wheel weights ** $1,230 $0
Front bull-bar $1,230 $0
Front bull-bar + front weights mounted on side of hood (2+2 total 195 lbs) ** not available with front wheel weights ** MGH standard configuration $2,334 $0
Forward foldable front safety roll bar (r.o.p.s.) with gas shock ** Must select for Open Station Tractors ** $0 $0
Bare Safety Roll Bar ** Standard factory configuration, must check to order ** $0 $0
LED rear working light + LED beacon light ** only for roll-bar version ** $334 $0
Branches, dust and dirt protection kit -- for roll bar version $472 $0
Adjustable padded seat ** standard factory configuration, must check to order ** $0 $0
Comfort seat with safety belts with automatic retractors and mechanical seat suspension -- MGH Standard Configuration $196 $0
Comfort seat with safety belts with automatic retractors and pneumatic seat suspension with continuous driver-weight adjustment (from 110 to 287 lbs) and height regulation adjustment with 3.1 in range. $518 $0
540-540E PTO ** Standard factory configuration, must check to order ** $0 $0
540-1000 PTO $702 $0
10.3 g/min hydraulic pump ** Standard factory configuration, must check to order ** $0 $0
14.5 g/min hydraulic pump + oil cooler $518 $0
Height adjustable drawbar hitch ** Standard factory configuration, must check to order ** $334 $0
Without front 3-point hitch ** Standard factory configuration, must check to order ** $0 $0
Hydraulic front 3-point hitch + 1 DA valve replicated at the front (2 quick couplers at the front) ** in combination with bull-bar (N18002) -- not available with front wheel weights ** $2,358 $0
Oscillating rear 3-point arms with side stabilizers cat 1-2 ** Standard factory configuration, must check to order ** $0 $0
Adjustable, in length, rear 3-point arms with cat. 2 quick coupling $472 $0
Adjustable, in length, rear 3-point arms with cat. 1 quick coupling without balls $564 $0
Adjustable, in length, rear 3-point arms with cat. 2 quick coupling without balls $552 $0
Hydraulic system with: 1 DA valve with floating position, 1 oil reflow (total 3 quick couplings) ** Standard factory configuration, must check to order ** $0 $0
Hydraulic system controlled with multifunction handle with: 4 DA valves (1 with floating position), 1 oil reflow (total 9 quick couplings)  $1,196 $0
Hydraulic system controlled by multifunction handle with: 5 DA valves (one of which with floating position + one as continuous delivery function) + 1 oil reflow (total 11 quick couplings)  ** in combination with N41002 ** $4,014 $0
Hydraulic system controlled with multifunction handle with: hydraulic power lift with draft and position control + 4 DA valves (1 with floating position), 1 oil reflow (total 9 quick couplings)  $4,531 $0
Rear 3-point with mechanical top link and vertical tie-rod ** Standard factory configuration, must check to order ** $0 $0
Higher rear 3-point with mechanical top link and vertical tie-rod   $299 $0
Rear 3-point with hydraulic top link and vertical tie-rod + a mechanical vertical tie-rod ** not available with N06011 as it requires 4 quick couplers and the standard configuration only has 3 ** $2,150 $0
Higher rear 3-point with hydraulic top link and vertical tie-rod + a mechanical vertical tie-rod ** not available with N06011 as it requires 4 quick couplers and the standard configuration only has 3 ** $2,392 $0
Without damping on rear 3-point  ** Standard factory configuration, must check to order ** $0 $0
Damping on rear 3-point ** not available with N06010 ** $483 $0
Cruise control ** not available with joystick (N06008) ** $494 $0
$1,543 $0
$0 $0
Subtotal Carraro List Price $49,556
Less 20% Dealer Discount ($9,911)
Tractor Total $39,645
$0
$0
$0
$0
$0
$0
Dealer Cost $39,644.80
$0
Customer Total Selling Price $39,644.80








Dealer Info:






Salesman Info:




GENERAL CONDITIONS OF WARRANTY

“Valid from February 1st 2021”

GENERAL REMARKS

Antonio Carraro S.p.A. (hereinafter A. Carraro) is an industrial company operating in the production and sale of tractors, machinery and equipment for agriculture and the environment.

All  A. Carraro  products  are  guaranteed  free  from  manufacturing  and/or  assembly  defects  and  fit  for  their intended purpose.

The terms of the warranty, which are normally 24 months for products in stock at the Dealership (commencing from the date of the invoice), 24 months from the moment of handover to the end customer or a maximum of 2000 operating hours, whichever comes first, are indicated in the general conditions of warranty in the Certificate of Delivery and in any case are no greater than the general terms indicated above.  

Any repair and/or replacement operations carried out during the warranty period shall not affect the expiration date of the warranty.

Vehicles in stock at the Dealership

If  the  vehicle  in stock is  not  sold  by  the  dealership  within  24  months  from the invoice date,  the  warranty  shall  be automatically activated at the dealership and the 24 month warranty shall commence from that moment.

If the vehicle is sold to the end customer thereafter, the terms of the warranty shall remain unchanged, the Dealership shall be personally responsible for the fulfillment of the obligations to the end customer for the warranty or residual warranty period.

Warranty between the interested parties

The warranty issued by A. Carraro governs the manufacturer's obligations towards the Dealership. In turn, the Dealership is responsible for the provision of services under warranty to the end customer, undertaking to effect any repair or replacement operations under warranty on its own responsibility and at its own expense.

Dealership’s commitments

The Dealership is obliged to organize a suitable repair workshop with adequate equipment, up-to-date technical documentation and any specific tools (including those indicated by A. Carraro Technical Assistance Service), based on the type and number of products sold and in operation within its territory.

The Dealership shall send at its own expense its own technical personnel to the A. Carraro technical training center for a period of training at least one a year, in accordance with the various training modules proposed.  In the event of failure to participate in the training modules, in cases where specialized A. Carraro personnel are required for the repair of vehicles under warranty, the A. Carraro Technical Assistance Service shall not accept liability for the labor provided by the dealership, and may, additionally consider whether to charge for the relative costs sustained.

The Dealership is obliged to sell and install on A. Carraro products original parts supplied directly by A. Carraro, otherwise the warranty shall be deemed invalid.  

 

ACTIVATION OF THE WARRANTY

The date on which the end customer warranty cover commences shall be the handover date indicated in the Certificate of Delivery.  The Certificate of Delivery issued  by  the  Dealership  to  the  purchaser  at  the  moment  of  product  handover establishes the period of time for which the warranty is valid. It also confirms that the Dealership has provided the customer with instructions regarding the correct use and maintenance of the product.

At the time of product handover, the Dealership is invited to carry out the checking and pre-delivery inspection operations.  It must then fully register the Certificate of Delivery and also complete the other forms required.

The  Dealership  must have the customer sign the certificate, send a copy by email to the address darren@antoniocarrarus.com no later than 60 days after the handover date, keep the original paper copy and give a copy to the end customer. 

In  the  case  of  failure  to  send  the  Certificate of Delivery  within  the  specified  term  (which  is  mandatory),  the warranty  shall  not be  activated  and  the  Dealership shall  be personally  responsible  for  the  fulfillment  of  the warranty obligations to its own customers.

The  use  of  A. Carraro  products  by  the  Dealership  (for  example,  use  of  machines  for  tests  and/or demonstrations, loan, rental, etc.) is deemed as the start of the warranty period, and therefore the warranty activation procedure must be followed.

Throughout the warranty period, the scheduled service operations (ordinary maintenance) must be carried out at an authorized dealership, in compliance with the manufacturer’s instructions, otherwise the warranty shall be deemed null and void.  The Dealership must record all services in order to validate the warranty.  

WARRANTY LIMITS AND EXCLUSIONS

The following items are excluded from warranty cover:

- Used parts and products, including those produced by A. Carraro.

- Parts  not  produced  by  A.  Carraro  which  are  instead  covered  by  the  warranty  policy  of  the  respective manufacturer/distributor (e.g. tires, car radios, satellite devices or similar, etc.).  The  Dealership  is  required  to  activate,  where  applicable,  the warranties on all such products. The warranty is therefore not activated at the same time as the sending of the Certificate of Delivery for the A. Carraro product.

Any A. Carraro products which, in the judgment of A. Carraro, have been damaged or compromised by the following are excluded from warranty cover:

- improper use, accidents, other hazards, negligence, carelessness, or use in excess of the prescribed operating capacities;

- lack of, or insufficient, normal maintenance;

- non-compliance with the instructions in the Use and Maintenance Booklet;

- repair and/or maintenance carried out without observing the specific instructions provided by A. Carraro;

- installation of accessories and devices (e.g. 4.0 kit) unknown by A. Carraro;

- equipment and accessories which prevent its correct operation and compromise its integrity;

- non-original or used parts, including those produced by A. Carraro;

- parts, applications, transformations aimed at modifying the performances, yield or capacity of the vehicle.

The following are also excluded from the warranty and shall not be reimbursed:

- lubricants (if the original “Tony line” lubricants purchased from the A. Carraro Spare Parts Service are not used);

- costs sustained for the transport/transfer of people and vehicles from or to the place of repair;

- costs sustained for courtesy vehicles;

- damage sustained during product transport;

- financial losses sustained as a result of an inability to use the product.

The  warranty  does  not  cover  consumables  and parts inevitably and predictably subject to wear/deterioration due to normal usage.  These include, but are not limited to: filters, drive belts and chains, brake components, clutch components, bulbs, fuses, brushes, hydraulic control valves, hydraulic pumps, hydrostatic units, glass, light units, grass cutter blades and grass suction pipes.  

Should any fault or damage to complete functional assemblies be found during the warranty period (such as for example,  hydrostatic  units,  complete  solenoid  valve  blocks,  engines)  and these require replacement, the  dealership  must  contact  A.  Carraro After-sales Service before dismantling or replacing any components of the assembly in question.  A. Carraro shall accept no liability, whether direct or indirect, for losses incurred as a result of damage of any type or nature.

Dubious warranty claims

In the event of doubt as to whether specific damage is covered by the A. Carraro warranty, the Dealership should proceed in the most appropriate of the two cases described below: 

- contact A. Carraro Technical Assistance Service immediately to obtain authorization for the repair under warranty;

- charge the cost of the repair to the customer, with conditional reimbursement should the warranty claim be accepted by A. Carraro Technical Assistance Service. 

MAKING A CLAIM UNDER WARRANTY

To make a claim under warranty, complete the on-line form on the B2B portal (http://b2b.antoniocarraro.it).  Claims under warranty must be sent within 60 days of the date of the damage and within 30 days of the date of repair. Claims sent after this period will be obligatorily rejected and must not in any circumstances be submitted.  As regards materials for repairs under warranty, if not already in stock at the dealership, they can be ordered from A. Carraro Parts Service as a "Warranty-Urgent" order A. Carraro undertakes to reimburse the Dealership in accordance with the conditions stipulated for ”Warranty-Urgent” order (list price less 20%) for parts used, provided that these are ordered using this order type, and for labour at the rate agreed with the Dealership.

NB: if the claim under warranty sent includes material not purchased with an “Warranty-Urgent” order but nonetheless purchased from A. Carraro, this will be reimbursed under the terms for a “stock replenishment” order (standard) in effect with the dealership.  

A. Carraro undertakes to reimburse the Dealership in accordance with the conditions stipulated for “Warranty-Urgent” orders (list price less 20%, excluding parts at net prices) for the parts used (provided that these are ordered using this order type and that the relative reference is indicated in the Warranty Claim Form), and for labor, at the rate agreed with the Dealership. 

MATERIAL REPLACED UNDER WARRANTY

The warranty procedure does not require the parts replaced during the repair process be sent first to A. Carraro.  However, these parts should be kept by the Dealership so that they are available if they need to be inspected by the After-sales inspector from A. Carraro Technical Assistance Service  on the occasion of his/her first convenient visit or, unless otherwise communicated,  for a period of 30 days from receipt of the warranty response.  These  parts must also be identifiable and traceable by both the Warranty Claim Number and the  product serial number.

Any  damaged  material  sent to  the  Technical  Assistance  Service,  unless  requested,  shall  not  be accepted,  and shall be returned to the sender.

REIMBURSEMENT UNDER WARRANTY

Following presentation of the warranty claim form, A. Carraro Technical Assistance Service  shall communicate its response to the Dealership via a "PDF" document sent to the e-mail address provided by the Dealership. A copy of this document is available on the B2B portal (http://b2b.antoniocarraro.it).

Reimbursement  of  the  claim  shall  follow,  in  accordance  with  the  usual  procedure  established  with  the Dealership.

The judgment of A. Carraro Technical Assistance Service shall be final.

***The court of Padua shall have sole jurisdiction for all legal disputes.***

***A.CARRARO S.p.A. reserves the right to modify the“General conditions of warranty” at any time without prior notice.***

***This document is confidential; if you have received it in error, please delete/destroy it in accordance with the Personal Data Protection Code, Legislative Decree no. 196 of 30 June 2003 ***

 

“EXG24+24” Maximum Protection, Up to 4 worry-free years!

Antonio Carraro S.p.A. (hereinafter A. Carraro) guarantees the product and its component parts for an additional period of 24 (twenty-four) months or a maximum of 4000 operating hours for end customers who purchase the extended warranty “EXG24+24”, provided that the machine, if already in the possession of the customer, is still within the first warranty period of 12 months from the time of purchase.

For the duration of the warranty period A. Carraro undertakes, acting through its own authorized service centers and  those  of  its  agents or local Dealerships,  to  replace  free  of  charge any  parts  found  to  be  defective  as  a  result  of  verified manufacturing or material defects, provided that the scheduled services have been carried out in accordance with  the  indications  of  A.  Carraro  (see  portal  B2B http://b2b.antoniocarraro.it).  The  replacement  and repair operations shall be performed in the shortest time possible, in accordance with the capabilities of the Dealership.

On purchase of the package “EXG24+24” A. Carraro extends the general conditions of warranty for a further 24 months from the expiration date of the original 24 month warranty or up to a maximum of 4000 operating hours.  Throughout the warranty period, the scheduled service operations (ordinary maintenance) must be carried out at an authorized dealership, in compliance with the manufacturer’s instructions, otherwise the warranty shall be deemed null and void. 

It is possible to purchase the extended warranty package “EXG24+24”:

  • After purchase of the tractor by the end customer, within the first warranty period of 12 months; this will extend the warranty by a further 24 months;
  • At  the  time  of  tractor  purchase;  this  will  immediately  extend  the  warranty  period  by  a  further  24 months, making a total of 48 months.

The following are excluded from the 1st year of extended warranty or a maximum of 3000 operating hours:

  • The electrical system (instruments, accessories and controls);
  • Bodywork;
  • Paintwork;

The following are excluded from the 2nd year of extend warranty or a maximum of 4000 operating hours:

The electrical system (instruments, accessories and controls);

  • Bodywork;
  • Paintwork;
  • Power steering;
  • Remote valves;
  • Hydraulic pipes;

In  addition,  any  financial  losses  resulting  from  the  inability  to  use  the  product  are  not  reimbursable  under warranty.  A. Carraro shall accept no liability, whether direct or indirect, for losses incurred as a result of damage of any type or nature.